Can #30 and #15 be ordered as the same specification?

No. #30 is 0.5 mm (1/50 in), and #15 is 1.2 mm (3/64 in). Keep separate order lines, sample references and packaging labels for the two lengths.

Is #30 approved for every attachment comb?

No blanket attachment-comb approval is published. Send the comb maker, model and intended blade pairing for review before describing a combination as compatible.

Which breed determines a #30 purchase?

No single breed determines it. The supplied #30 sheet uses a broad all-breeds reference for specialist close-cut applications; coat, skin, body area and professional judgement remain necessary.

A5 detachable blade reference

#30 A5 Clipper Blade

#30 is listed at 0.5 mm (1/50 in), between #40 and #15 in Jizu's short-cut range. This page helps buyers distinguish that nominal length from the clipper mounting format and cutter material.

Blade specification

#30 uses the published standard tooth category. There is no published tooth-pitch measurement or special attachment-comb approval attached to this listing. Confirm both separately if a distributor intends to sell it as part of a system.

Blade format: A5 detachable
Listed cut length: 0.5 mm (1/50 in)
Published tooth type: Standard

#30 photos and video

#30 detachable clipper blade, front view — front view

#30 product and mounting demonstration

Shown: the carbon-steel moving-cutter configuration. Confirm the exact cutter configuration and clipper model before ordering.

15-second product-handling excerpt. The machine shown is demonstration equipment, not a universal compatibility claim. Video stills retain the original platform watermark. There is no spoken audio.

Review the teeth, markings and mounting connection shown here. Cutter material, branding and packaging are specified separately in your quotation and approved sample.

Define the reason for a 0.5 mm order

The size reference lists close trimming and ear-area work for #30; customer notes include veterinary contexts. These are application references, not directions to clip inside ears or over wounds. Professional assessment is required.

Close trimming
Ears

Customer-provided selection reference

These catalogue references describe applications to review, not suitability for every dog of a named breed. A qualified groomer should assess coat and skin; veterinary preparation requires veterinary direction.

Coat context: Ultra-fine coat context, Skin-level clipping context
Referenced breeds: All dog breeds
Referenced body areas: Medical area, Area surrounding a wound
Referenced use context: Veterinary trimming, Skin care

Construction and material options

Both moving-cutter options can be discussed for a #30 order. Keep a steel fixed blade in the written specification, and do not turn the ceramic option into an unsupported promise of cooler operation or longer life.

Fixed blade material: Steel
Moving blade material options: Carbon steel, Ceramic
Steel grade options: 3Cr, 4Cr, 5Cr, 420J12, Custom

Configurable manufacturing parameters

The following parameters can be specified for an A5 blade program.

Steel grade
Heat treatment
Surface coating
Tooth pitch
Tolerance

Prepare a specification-focused RFQ

Include requested blade size, exact clipper model, moving-blade material, steel grade, customization, packaging, and quantity. MOQ is 100 pieces; standard lead time is 1–2 weeks.

Request a Quote for #30

Compare nearby cut lengths

Compare nominal listed lengths, not a guarantee of the finished coat. Coat condition, preparation and handling affect the result.

A buyer comparing #30 with #15 should decide whether the shorter nominal finish is needed before selecting the material. Include the intended application and the exact machine in the enquiry. Close-cut use requires professional assessment rather than a breed-only choice.

Blade specification	Listed cut length	Published use reference
#40	0.25 mm (1/100 in)	Pre-operative shaving, Foot pads
#30	0.5 mm (1/50 in)	Close trimming, Ears
#15	1.2 mm (3/64 in)	Face, Feet

Confirm the clipper model before ordering

This is an A5 detachable blade, not a universal fit claim. Check the Compatible with model list, then include the exact model and a mounting photo in the RFQ. Blade size identifies cut length; it does not verify the machine.

Check Compatible with model references

Inspection evidence to request

For #30 procurement, agree size identification, edge-condition and alignment checks before sampling on the nominated clipper. Record mounting results separately from cutting observations so a fit issue is not mistaken for a material issue.

Jizu states an IQC / IPQC / OQC workflow. No size-specific hardness, tolerance, temperature, service-life or batch pass-rate results are published. The checks below are proposed purchase requirements, not measured results.

Review the inspection checklist

#30 blade questions

Confirmed specification details and RFQ inputs for B2B buyers.

Can #30 and #15 be ordered as the same specification?: No. #30 is 0.5 mm (1/50 in), and #15 is 1.2 mm (3/64 in). Keep separate order lines, sample references and packaging labels for the two lengths.
Is #30 approved for every attachment comb?: No blanket attachment-comb approval is published. Send the comb maker, model and intended blade pairing for review before describing a combination as compatible.
Which breed determines a #30 purchase?: No single breed determines it. The supplied #30 sheet uses a broad all-breeds reference for specialist close-cut applications; coat, skin, body area and professional judgement remain necessary.