Which breeds are confirmed for #3F?

None are confirmed in the current customer reference. The published #3F facts are 13 mm (1/2 in), Finish Cut and the stated construction options. Include coat, body area and target finish for sample review.

How much longer is #3F than #4F?

The listed metric difference is 3.5 mm: #3F is 13 mm (1/2 in) and #4F is 9.5 mm (3/8 in). The nominal difference is not a guarantee of the resulting coat.

Can I approve #3F from the front photograph alone?

No. The photograph documents a supplied product, not material certification or clipper fit. Approve the requested cutter configuration, exact-model fit and agreed inspection criteria using a representative sample.

A5 detachable blade reference

#3F A5 Clipper Blade

#3F is the longest published Jizu A5 size at 13 mm (1/2 in). This listing confirms length, Finish Cut classification and material options without assigning an unverified breed or coat recommendation.

Blade specification

The confirmed tooth category is Finish Cut. Keep the published #3F label in the purchase specification; do not invent a separate tooth geometry, tooth-pitch measurement or additional equivalent model number from other catalogues.

Blade format: A5 detachable
Listed cut length: 13 mm (1/2 in)
Published tooth type: Finish cut

#3F product photo

#3F detachable clipper blade, front view — front view

Review the teeth, markings and mounting connection shown here. Cutter material, branding and packaging are specified separately in your quotation and approved sample.

Start from the half-inch requirement

Use #3F when specifying a 13 mm (1/2 in) nominal cut length. Describe the intended coat, body area and grooming requirements in your RFQ so that sample evaluation can address the actual application.

Longest finish cut

Customer-provided selection reference

No breed or coat recommendation has been confirmed for #3F. Specify the intended coat, finish and clipper model for a sample review; do not select it from breed name alone.

Construction and material options

For #3F, steel remains the fixed-blade material and carbon steel or ceramic are moving-cutter options. The 13 mm size does not establish a particular hardness, coating or steel grade. Specify those fields in the RFQ when they are required.

Fixed blade material: Steel
Moving blade material options: Carbon steel, Ceramic
Steel grade options: 3Cr, 4Cr, 5Cr, 420J12, Custom

Configurable manufacturing parameters

The following parameters can be specified for an A5 blade program.

Steel grade
Heat treatment
Surface coating
Tooth pitch
Tolerance

Prepare a specification-focused RFQ

Include requested blade size, exact clipper model, moving-blade material, steel grade, customization, packaging, and quantity. MOQ is 100 pieces; standard lead time is 1–2 weeks.

Request a Quote for #3F

Compare nearby cut lengths

Compare nominal listed lengths, not a guarantee of the finished coat. Coat condition, preparation and handling affect the result.

Comparing #3F with #4F establishes a nominal 3.5 mm difference, not proof that the longer blade will suit the same coat. Request sample review with the intended clipper and finish requirements before setting a new distributor or grooming-chain assortment.

Blade specification	Listed cut length	Published use reference
#5F	6.3 mm (1/4 in)	Full body
#4F	9.5 mm (3/8 in)	Long-haired dogs
#3F	13 mm (1/2 in)	Longest finish cut

Confirm the clipper model before ordering

This is an A5 detachable blade, not a universal fit claim. Check the Compatible with model list, then include the exact model and a mounting photo in the RFQ. Blade size identifies cut length; it does not verify the machine.

Check Compatible with model references

Inspection evidence to request

For #3F, agree size-marking, tooth-condition, cutter-alignment and exact-model fit checks first, then define application-specific finish evaluation. A #4F test record or factory photograph cannot substitute for a #3F batch report.

Jizu states an IQC / IPQC / OQC workflow. No size-specific hardness, tolerance, temperature, service-life or batch pass-rate results are published. The checks below are proposed purchase requirements, not measured results.

Review the inspection checklist

#3F blade questions

Confirmed specification details and RFQ inputs for B2B buyers.

Which breeds are confirmed for #3F?: None are confirmed in the current customer reference. The published #3F facts are 13 mm (1/2 in), Finish Cut and the stated construction options. Include coat, body area and target finish for sample review.
How much longer is #3F than #4F?: The listed metric difference is 3.5 mm: #3F is 13 mm (1/2 in) and #4F is 9.5 mm (3/8 in). The nominal difference is not a guarantee of the resulting coat.
Can I approve #3F from the front photograph alone?: No. The photograph documents a supplied product, not material certification or clipper fit. Approve the requested cutter configuration, exact-model fit and agreed inspection criteria using a representative sample.